Rice Crisp Equipment-manufacture,factory,supplier from China

Equipment introductionDLG90 type extruder is mainly used to process all kinds of twice-puffed food and three-dimensional puffed food. The raw materials used are various starch, flour and potato whole powder.

Rice crisp processing  Equipment  uses wheat flour as raw material which is extruded and shaped by the single- screw extruder. The snack will be in different shapes by changing the moulds, such as pizza rolls, shell, screw, ring, star, chip, stick, etc.      After fried and flavored, the final snacks will be crispy and tasty.

　　　The core filling snack production line developed by our company is an advanced production line, which uses advanced co extrusion technology to extrude two kinds of products with different texture and taste on a twin-screw host at the same time. It can process a variety of raw materials at the same time, such as Rice noodles, syrup, fruit paste, etc., and process them into a variety of sandwich rice fruit products, such as McChicken pieces, cocoa desserts, sandwich rice fruit, maishao, banana crisp, rice fruit, etc.

Equipment introductionThe dryer is composed of a heating room and a material room. The main equipment includes heating equipment, ventilation and moisture removal equipment, and temperature and humidity control equipment. It has good coordination for the four baking factors (water, fire, wind and time) of the baking environment. In the process of following the laws of nature, the natural properties of the hot and cold air flow are used to promote the natural circulation of the hot air in the drying box.

Introduction to FLS Snack Products Cooling Conveyor Machine:FLS Snack Products Cooling Conveyor Machine is a supporting equipment for the oven, which is used to cool and transport baked materials. This machine adopts stainless steel mesh belt driven by chain to transport materials.

Equipment introductionThis machine is a special equipment for drying semi-puffed food. It can dry food blanks of various shapes such as potato chips, French fries, spirals, shells and crisp corners. It has a wide range of applications.This machine uses the combustion chamber for heating, and uses the chain to drag the stainless steel mesh belt for transmission. And it is equipped with an advanced frequency conversion speed regulation system, which can set different transmission speeds according to different materials.

　　The nutritional rice production line takes grains as the main raw materials (corn flour, rice flour, millet flour, flour, etc.), vegetables, fruits, eggs, meat and other selective ingredients, and adds minerals such as calcium, phosphorus, iron and vitamins.

This puff snack making machine can use corn, rice, and other grain powder as raw substances to supply right away puffed snacks in variou shapes, together with chip, ball, ring, stick, flake, flower, and lots of others. after dried and flavroed, the snacks are crispy and attractive which might be very famous in the marketplace. this puff snack machine is characteristics of easy opeation, reasonable shape, low intake, and excessive performance, which make it the nice choice for medium production unit.Schematic diagram of production line

Equipment introductionSLG35-A twin-screw extrusion puffing tester is a puffed food equipment suitable for research, teaching and formula research and development, which is developed by using advanced twin-screw extrusion technology and combined with our company's rich experience in puffed food technology research for many years. The characteristics of the equipment are: the screw has self-cleaning function, high efficiency of material pushing, and good shearing and homogenizing effect of material.

Equipment Introduction Of Snack Products Bugles Shaper:This machine is a supporting equipment of Double screen Snack Production Extruder, which is mainly used for forming and cooling three-dimensional compound extruded food. Materials enter the Snack Products Buckles Shaper from the cooling guide frame for composite.

Equipment introductionSLG72-A large-scale twin-screw extruder is a puffed food equipment developed by using foreign advanced twin-screw extrusion technology combined with our company's rich experience in puffed food technology research over the years.The equipment adopts a stable and reliable frequency conversion speed regulation system, which is more convenient to operate, and the data display is more accurate and intuitive. The spiral part adopts a specially designed screw structure such as two co-rotating, double-ended arc grooves and kneading blocks.

Rice kernal making machine is one of the newly developed double-screw extruding techniques of our corporation. the conventional stir-fry handiwork has low efficient and much less usable uncooked substances, and its sanitation and fine are difficult to govern. the double-screw extruding method makes up the ones lacknesses. it now not handiest can method grain materials, like buckwheat, oats, etc.

This procedure line is one of the newly advanced double-screw extruding techniques of our corporation. the traditional stir-fry handiwork has low efficient and much less usable raw materials, and its sanitation and great are difficult to control. the double-screw extruding approach makes up those lacknesses. it not handiest can method grain substances, like buckwheat, oats, and many others.

This manner line is one of the newly developed double-screw extruding techniques of our corporation. the conventional stir-fry handiwork has low efficient and much less usable uncooked substances, and its sanitation and fine are difficult to govern. the double-screw extruding method makes up the ones lacknesses. it now not handiest can method grain materials, like buckwheat, oats, etc.

Equipment introduction:SLG65—C type double-screw extruder technical parametersScrew diameter: Φ65mmScrew speed: 0～250rpmzProcessing capacity: 80～120kg/hTemperature control range: 0～399cMotor power: 22kwMachine center height: 1020mmDimensions: 2400×960×1800mmSLG65-C type double-screw puffing machine is a puffing food equipment suitable for my country’s national conditions, developed by using the international advanced double-screw extrusion puffing technology, combined with our company’s rich experience in puffed food technology research for many years.Host FeaturesThe host adopts a stable and

This puff snack making machine can use corn, rice, and other grain powder as uncooked substances to produce immediately puffed snacks in variou shapes, such as chip, ball, ring, stick, flake, flower, and many others. after dried and flavroed, the snacks are crispy and tasty which might be very popular in the marketplace. this puff snack machine is characteristics of simple opeation, reasonable shape, low consumption, and excessive efficiency, which make it the best preference for medium manufacturing unit.Schematic diagram of production line

　　The nutritional rice production line uses Rice noodles as the main raw material, which can be selectively filled with various vitamins and minerals as required. The shape of the rice grains is extruded by the twin-screw extruder, and then dried to the required moisture. It can be eaten after cooking for about 10 minutes. The nutritional rice artificial rice production line endows rice with unique shapes, flavors, and colors, and adapts to the constantly developing market for health and wellness foods with scientific nutritional ratios and easy digestion.

　　The nutritional rice production line developed by our company takes Rice noodles as the main raw material, and can selectively fill a variety of vitamins and minerals, such as vitamin B, vitamin C, vitamin A, etc. according to production needs. Extrude the shape of rice grains through a twin screw extruder, then dry to the required moisture content, and cook for 5-10 minutes before consumption. The extrusion puffed rice production technology developed by our company makes it possible to strengthen trace elements in rice.

　　The fried wheat flour snack production line is another new expanded application of twin screw extrusion technology. This production line integrates raw material mixing, steaming, ripening, puffing, shaping, frying, and seasoning, without the need for a boiler. The production process is simplified, efficient, and environmentally friendly. The raw materials required for production can be either single Rice noodles, flour, corn flour, corn flour and other materials, or mixed materials.

This puff snack making device can use corn, rice, and special grain powder as uncooked materials to supply right away puffed snacks in variou shapes, together with chip, ball, ring, stick, flake, flower, and plenty of others. after dried and flavroed, the snacks are crispy and appealing which is probably very famous in the marketplace.

　　The fully automatic nutritional rice production line is developed to address the significant loss of nutrients in rice during traditional rice milling production processes. Rice and other nutrients can be made into high value-added products through extrusion technology. During this process, broken rice and rice bran can be reused. The entire production process is simple and easy to operate. After crushing the broken rice, it is mixed with a certain amount of water, oil, etc.

OverviewThis complete set of equipment is widely used, and can fry various foods such as potato chips, shrimp sticks, and rice noodles. This complete set of equipment integrates the functions of frying, oil rejection, and lifting. A series of actions are controlled by PLC centralized automatic control, which makes the control accurate and reliable, greatly improves the production efficiency, and saves a lot of human resources.

This process line uses potato starch, corn starch as main materials to produce a variety of twice extrusion food in different shapes which are popular in the market, such as crispy pea, shell, screw, square tube, round tube, wave, etc. This process line is characterized by unique technics, rational configuration, high automation and stable performance. It can finish steaming, extruding and shaping in one step without a boiler.

Equipment introductionThis machine is the supporting equipment for the pasta host. This machine is required when the main engine produces traction cut. Both straight and oblique cuts can be produced. The machine has reasonable equipment, beautiful appearance, and is equipped with an advanced frequency conversion speed regulation system.Schematictechnical parameter:Cut off drive power: 0.55KWTraction drive power: 0.37KWDimensions: 2300×830×1100mmProduction capacity: with the hostWeight: 250kgInstallation and corresponding adjustment1.